Here Are 5 Signs You Need To Descale Your Pipes

A clogged drain pipe can cause a lot of problems. Every day, we shower, wash the dishes, wash our clothes, and quench our thirst, all from the same source. Our daily routines can suffer immeasurably from a clogged drainpipe. Clogged pipes can do a lot of damage, and faulty plumbing may also impact the structure of your home. Therefore, regular maintenance is important for your own health and safety, and also in ensuring that your house does not suffer from water damage. 

Maintenance is not for free, so timing the maintenance will not only fix the problem but will save you money too. One reputable plumbing service from Sunset Beach recommends people signup for scheduled checks to make sure that your pipes are in tip-top condition throughout the year, every year. There are a lot of health risks that are associated with unclean water taps and there is no reason at all to not want to keep your home’s water quality safe for your family’s consumption. 

Image by Alexas_Fotos from Pixabay

Descaling your pipes is a good start, so here are five ways on how to know when its time to do just that.

Water Seepage 

Water seepage from pipes inside your home is perhaps the most obvious sign to look out for. When this happens, it is clear that your drain has issues. The most common example of this is when you flush the toilet and water end up in the bathtub, gurgling up through the drain. Usually, this happens because your pipe is clogged. Instead of having the wastewater run its natural course, and make its way into the waste pipe, it is, instead, forced through the drain closest to the waste pipe. In the event that water starts seeping, you should quickly look to get your pipes descaled, so as to prevent any damage to your house.

Exterior Pipes Leaking Water

A lot of homes prefer having the drainage line on the exterior. The purpose of this is to avoid a leak from occurring inside your home, and instead make sure it is discharged from the pipes. Additionally, a cleanout makes it easier to descale the pipes. Typically, the way to detect a leak from the exterior pipes is by the presence of watermarks on the exterior of the house. This normally means one of two things, either the septic system is full, or the mainline is dealing with a stoppage. If this happens, then you will need to authorize a collective cleanup of your pipes. With the help of professional hydro-jetting services, pipes will be clear and descaled in no time. Hydro-jetting can remove any stoppages from your drainage system, allowing water to run smoothly again.

Bad Odour 

If you do not descale your pipes often, the drainage system can become clogged, and bad odours can arise. When waste gets caught, an unpleasant build-up can be hard to remove and can cause lots of problems. Sewer gas can also build up and be released, this is where the unpleasant odour comes from. Typically, the two places where this is especially noticeable is the sink in your kitchen, and shower, sink, and toilet in your bathroom.

Pronounced Bubbling Sound

When pipes are clogged, there is less space for the water to pass. Consequently, the water will produce a bubbling or gurgling sound that will likely echo through your drains. When this happens, you cannot ignore the need to descale your pipes. The sound is most commonly heard in the bathroom. After flushing the toilet, you may hear a clear bubbling sound. If this is the case, it becomes an urgent issue, otherwise, the pipe can experience a complete blockage. Additionally, quickly seeking a solution can save you time and money which you would otherwise be spending on bigger problems. 

Image by analogicus from Pixabay

Slow Draining

Perhaps one of the most recognizable indicators of a poor drainage system is the slow movement of waste. When this happens, it becomes evident that your pipes are not clear and you need to have them cleaned. There are many things that can cause this blockage, including a build-up of solid waste or unaligned pipes. The problem should not be ignored, or overlooked, and should instead be fixed immediately. Some people ignore the problem if the system still works, but that will only make the problem worse. Failing to react in time can lead to much bigger issues, which almost always cost more than doing it right the first time. 

If you look out for these signs, you will be able to successfully avoid any of the problems that may follow. A failure to react quickly can cost you a lot of money and lead to higher maintenance costs. However, you should not only rely on these 5 signs but look to perform regular checkups too. Make sure that the inspections are led by credible and competent experts. By doing so, you will prevent any large-scale damage.


Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!